Why don't I use timecode in Bi-2?

1. I do not need him. The drummer's musical thinking instilled the ability to intuitively understand music: the structure of songs, stop times, breaks. I am able to launch the required cue myself exactly on the beat.
2. The group does not play to a pad or metronome. There is an opinion that the metronome in certain genres kills the living pulse of the music. It happens that the tempo is influenced by the halls themselves and the special mood of the musicians. Then the songs can be performed slower, faster, or accelerated in tempo in some parts of the work. There are groups and artists, for example, where a metronome would destroy the living breath of music: Foo Fighters, Metallica, Red Hot Chilli Peppers, Adele. At the same time, the opposite example: Muse, Maroon 5, 30 Seconds to Mars, Beyonce.
3. It's boring. I'm a musician and I want to be part of a group. I like to press buttons and pull faders, rather than stand idly by and watch my cue sheets play automatically.

Nevertheless, I used timecode this year at the Moscow concert of the group “My Michelle”. There are several reasons: there was little time to immerse myself in the material and I could not attend the show in person.

What benefits can you get from using peeling pads?

I want to note right away that the effect will not be lightning fast. If you have very dirty skin, you will need a long course. The essence of the cleansing pad does not contain a large percentage of acids in its composition. The result is a delicate and gentle exfoliation.

For myself, I noted the following positive effect:

• Velvety, moisturized skin.
• Radiant, fresh complexion.
• Clean, tightened pores.
• Delicate, soft skin without rashes or irritated areas.

Due to the activation of renewal and regeneration processes, small wrinkles were smoothed out. My face looks sleek and well-groomed. Therefore, peeling pads have taken one of the main places on my dressing table. I am sure that you will like the product too, the main thing is to choose a product that is suitable for your skin! 03/17/2020

General description of peeling

Experts from the Expertise International laboratory create innovative cosmetic products. Chemical peels from the Spanish brand do not require the use of a neutralizer; the delicate action of acids does not injure the skin, preventing complications. The procedure is distinguished by a short rehabilitation period; after recovery, a lasting, long-lasting effect is observed. The line of peelings includes TimeCode Light and TimeCodeBasic. The first are superficial exfoliants, the composition includes lactic, ferulic, and lactic acid.

Prescribed for mild photoaging, sensitive skin prone to dryness and irritation, and for the prevention of aging processes. TimeCodeBasic contains phytic, mandelic, salicylic acid, retinol, arbutin. The effect on the middle layers of the skin allows you to cope with severe hyperpigmentation, scars, acne marks, increased oiliness, superficial wrinkles, and sagging skin.

You can purchase yellow peeling in stores that sell products for professional cosmetologists. You can buy retinoic peeling for superficial effects 10 ml for 3,000 rubles, 30 ml for 6,200 rubles. The product for median exfoliation TimeCodeBasic 10 ml can be purchased for 4,000 rubles, 30 ml costs 11,500 rubles. The program also includes post-peeling creams, which allow you to prolong the effect of the procedure. You can buy regenerating cream 50 ml for 4,000 rubles. Peeling products are consumed economically in 1 session, from 5 to 10 ml are used.

Composition of TimeCodeBasic:

• mandelic acid 25% gently cleanses sensitive, irritated dermis, helps reduce the number of wrinkles, eliminates hyperpigmentation;
• arbutin 4% natural component has whitening properties, blocks melanin synthesis, allows you to achieve an even skin tone;
• phytic acid 1% has a slight lifting effect, improves blood flow, strengthens thin capillaries;
• salicylic acid 2% tightens pores, eliminates oily shine and acne marks, normalizes the functioning of the sebaceous glands;
• retinol 2% has a rejuvenating effect, stimulates cell renewal, promotes collagen synthesis, and reduces the number of wrinkles.

Blog

TimeCode Peelayer Basic is a superficial-medium peeling with a special “mission” – it fights skin imperfections that cannot be hidden or disguised:

• age and hormonal pigment spots;
• scars and marks after acne;
• lentigo;
• increased skin greasiness;
• lumpiness and loss of tone;
• deep age and expression wrinkles.

The active components of the peeling act on the problem in a comprehensive manner - exfoliate pigmented layers, block the production of melanin and regenerate the skin:

• Mandelic acid 25%

Gently cleanses fragile and sensitive skin, but at the same time causes active peeling, removal of dead layers and skin renewal.

• Arbutin 4%

Blocks melanin synthesis, intensively whitens and evens out skin color. And most importantly, it slows down the process of the appearance of new age spots. Plus - soothes, tones and softens the skin.

• Phytic acid 1%

Activates the synthesis of collagen and elastin, improves blood circulation, blocks the synthesis of tyrosinase - an enzyme that is involved in the production of melanin and leads to excessive appearance of age spots. Additionally tightens and strengthens the skin.

• Salicylic acid 2%

Tightens pores, normalizes the functioning of sebaceous glands and helps get rid of oily shine.

• Retinol 2%

Promotes cellular renewal, stimulates the synthesis of collagen and elastin, smoothes the skin and reduces the depth of wrinkles.

In combination, the active substances not only fight against corrosive age spots, but literally transform the face:

• instead of bumps and wide “pore-craters” - smooth and even skin;
• the skin becomes so elastic and taut that you want to touch it again and again;
• the procedure triggers cell renewal and activates cellular metabolism;
• and most importantly, a healthy glow and gloss appears. You look well-groomed, fresh, rested. It was as if the fatigue had been shed, and along with it, several years.

If you've been eyeing peeling for a long time or want a radical update, pamper your skin right now. Late autumn-winter is the time for retinoic and acid peels. The procedure can be carried out only during periods of inactive sun. Plus - set aside time for rehabilitation and skin care after peeling:

• Recovery lasts 6-10 days;
• Redness disappears by 2-3 days;
• Large-plate peeling occurs by 3-4 days.

All these stages are normal after peeling. The main thing is to correctly follow the care recommendations and protect your face from aggressive sun rays.

If you have questions or doubts, share them - call us at the number and we will tell you in detail about all the features and results after peeling.

Preparatory stage

During the consultation, the doctor assesses the condition of the integument and takes an anamnesis to exclude possible contraindications. Previously performed peelings or other cosmetic procedures are also taken into account, in which it is better to postpone the procedure until the skin is completely restored. You may need to see specialists and take tests. The composition must be tested for an allergic reaction.

It is necessary to follow a number of rules to prepare the skin for exfoliation:

• For several weeks, using skincare cosmetics with fruit acids allows you to increase the effectiveness of the upcoming peeling; the choice of line is best left to a specialist who takes into account the objectives of the procedure and the patient’s skin type;
• it is necessary to postpone a cosmetic session when taking hormonal drugs, as well as when treating with drugs containing retinol;
• for aged, dry, sensitive dermis, it is recommended to undergo a course of mesotherapy or biorevitalization; an integrated approach will ensure a pronounced result of rejuvenation and skin restoration;
• before the procedure, the doctor may recommend antiviral drugs, especially for patients with frequent manifestations of herpes;
• During the week you cannot visit the sauna, beach, solarium, gym, or drink alcohol;
• You should stop using comedogenic cosmetics.

Retinol peels have a superficial-medium effect.

How to use:

• the skin is cleansed with a mild product and degreased;
• Using a brush and applicator, apply a layer of Time Code Light. The product should remain on the prepared skin for three to five minutes. This time is determined by the cosmetologist depending on the condition of the skin and the desired effect achieved;
• the product is washed off the skin with water or a cleanser;
• Next, nourishing and moisturizing Time Code cream is applied to the skin. The cream will soothe the skin, remove it from a stressful state, and promote rapid recovery. After the procedure, the cream must be used for three or five days, at least five or six times a day.

During home care you must:

• continue to use the nourishing and moisturizing cream for three or four days, five or six times a day;
• in order not to lose the acquired effect and maintain the achieved result of the professional procedure, Time Code cream is used in the evenings for two months;
• During the procedure, as well as after it, regular use of sunscreen 50+ is necessary, and exposure to direct sunlight should be limited.

TIMECODE PEELAYER BASIC

Main Ingredients

• Mandelic acid
• Arbutin
• Phytic acid
• Salicylic acid
• Retinol

Indications

Moderate to severe photoaging, hyperpigmentation, post-inflammatory hyperpigmentation, lentigo, scarring, acne, actinic keratosis, oily skin and enlarged pores.

Protocol

2 procedures with an interval of 3 months between them. If necessary, it is possible to carry out a 3rd procedure with the same interval.

Important!

During therapy, as well as 2-3 months after completion of the course of procedures, it is recommended to regularly apply sunscreen and limit exposure to the sun.

Release form

Tube 10 g

• 3-5 procedures
• To start working with the product or a small number of patients for peelings
• Minimum investment
• To maintain the effect after a mid-peeling or in preparation for it

Tube 30 g

• 9-15 procedures
• For a larger flow of patients
• Economical packaging (lower cost of the procedure)
• For working with large areas (face, neck, décolleté, back, arms)

Mode of application

1. Clean and degrease the treatment area.

2. Apply a thin, uniform layer of TIMECODE PILEER BASIC to the skin of the treated area and leave for 30 minutes - 4 hours, depending on the indications, patient tolerance and clinical picture during the procedure.

3. Clean the treatment area using water and a mild cleanser.

4. Apply TIMECODE RECOVERY CREAM (moisturizing and nourishing cream) to soothe and restore the skin. Continue applying Cream B for 3-4 days, up to 5-6 times a day if necessary.

5. To enhance and maintain the results obtained after a professional procedure, use TIMECODE PCT KPEM 1 time per day in the evening for 1.5-2 months.

Summary

Yellow peeling from a Spanish manufacturer called Time Code achieves its goals and allows you to get rid of a wide range of aesthetic imperfections. It is recommended to carry out such procedures in salons under the supervision of a qualified cosmetologist, because the acid content in the composition can result in burns, itching and irritation of sensitive skin.

Minor effects will become noticeable after the first sessions, but for greater results it is necessary to undergo a course of peeling therapy, which consists of 3-5 procedures with an interval established by the cosmetologist (from 2 weeks to 3 months). The cost of one retinoic peeling procedure ranges from 3,000 to 5,000 rubles. In this case, you will need to allocate a certain amount for accompanying cosmetics, which you cannot do without during the period of treating the skin with fruit and other acids.

Incredible! Find out who is the most beautiful woman on the planet in 2020!

L oading. . .

TIMECODE PEELAYER LIGHT

Main Ingredients

• Mandelic acid
• Phytic acid
• Lactic acid

Indications

Mild and medium degree of photoaging, uneven color, loss of tone, thin skin, prevention of aging of young skin, preparation for medium and deep peels and maintaining results after them.

Protocol

The course of therapy with TIMECODE PILEER LITE is 5 procedures with an interval of 1-2 weeks between them.

Important!

During therapy, as well as 4 weeks after completion of the course of procedures, it is recommended to regularly apply sunscreen and limit exposure to the sun.

Release form

Bottle 10 ml

• 3-5 procedures
• To start working with the product or a small number of patients for peelings
• Minimum investment
• To maintain the effect after a mid-peeling or in preparation for it

Bottle 30 ml

• 9-15 procedures
• For a larger flow of patients
• Economical packaging (lower cost of the procedure)
• For working with large areas (face, neck, back décolleté, arms)

Mode of application

1. Clean and degrease the treatment area.

2. Apply a thin, uniform layer of TIMECODE PEELER LITE onto the skin of the treated area using an applicator (cotton swabs) and leave for 3-5 minutes, depending on the patient’s tolerance and the clinical picture during the procedure.

3. Clean the treatment area using water and a mild cleanser.

4 Apply TIMECODE RECOVERY CREAM (moisturizing and nourishing cream) to soothe and restore the skin. Continue applying the cream for 3-4 days, up to 5-6 times a day if necessary.

To enhance and maintain the results obtained after a professional procedure, use TIMECODE PCT CREAM once a day in the evening for 1-2 months.

What properties does tretinoin have?

Retinoids, being derivatives of vitamin A, in the human body are responsible for the process of cell division and differentiation, for intercellular connections. Retinoic acid is the active form of retinol, found in foods of plant and animal origin. Its presence in the peeling composition helps to activate cell regeneration, improve metabolic processes in cells and enhance the production of elastin and collagen, which are responsible for skin turgor and elasticity.

In addition, the substance has a pronounced antioxidant effect, neutralizing free radicals. In treatment courses in cases of psoriasis, acne, dermatitis, the use of acid is due to its high anti-inflammatory properties. When using tretinoin, healing occurs faster, and excessive pigmentation does not appear after inflammation. The acid also helps get rid of freckles and age spots.

TIMECODE peeling. Creams RST CREAM and TIMECODE RECOVERY CREAM.

For lovers of retinol peels!

TimeCode peeling contains new generation retinoids. This peeling, which appeared not so long ago, has already gained incredible popularity.

I would like to introduce you to TIMECODE peeling home care creams.

These are two creams, one provides visible fine plastic exfoliation ( TIMECODE RST CREAM), and the second has a restorative effect ( TIMECODE RECOVERY CREAM) .

According to reviews from our clients, RST CREAM provides very real peeling. Depending on the chosen application protocol, the result will be different, but the client’s desire to “get off” will be realized even with the first version of the protocol..

Home Use Protocol (Unless professional treatments are performed).

1, TIMECODE RST CREAM - 1 time every 4 days before bedtime for 2 weeks, on other days apply only TIMECODE RECOVERY CREAM.

2, TIMECODE PCT CREAM - 1 time every 3 days before bedtime for 2 weeks.

Data on home care creams:

TIMECODE RST CREAM - rejuvenation and elimination of skin hyperpigmentation.

1. Optimizes and maintains results after professional peeling.
2. It acts at different levels of the skin, providing comprehensive rejuvenation, as well as eliminating hyperpigmentation.
3. The antiradical effect of the drug helps reduce wrinkles by stimulating the synthesis of collagen and new skin cells.
4. Prevents the appearance of hyperpigmentation by blocking the formation of melanin.

TIMECODE RECOVERY CREAM - has a restoring, nourishing and moisturizing effect.

1. Designed for skin care after professional aesthetic procedures, reducing post-inflammatory hyperpigmentation, skin irritation, erythema, swelling, bruising, etc.
2. Promotes cell renewal and improves skin tone.
3. Can be used both as part of the TIMECODE procedure and to restore skin after other peels, fractional resurfacing and other procedures that damage the surface layer of the skin.

Ingredients

• phytic acid 1% - whitening (inactivates tyrosinase, especially in combination with arbutin), antioxidant, vascular strengthening and keratolytic effect (chelates, binds calcium ions, weakening cellular adhesion and promoting desquamation of corneocytes). Does not have photosensitivity.
• retinol 1% - antioxidant, rejuvenating effect (improving skin microcirculation, restoring the collagen matrix, normalizing the keratinization process). Regenerative effect (regulation of protein synthesis, normalization of cell membranes, increasing the speed of healing processes, reducing the likelihood of infection)
• glycyrrhizic acid 1% - antiviral effect (on different types of DNA and RNA viruses), regenerative, anti-inflammatory, antipruritic, immunomodulatory effect (inhibits the activity of phospholipase A and the formation of prostaglandin E2, enhances the process of movement of leukocytes into the area of ​​inflammation, potentiates oxygen-dependent mechanisms of phagocytosis). Membranoprotective effect (reduction of lipid peroxidation by binding free radicals and toxic oxidation products)
• butcher's broom 1% - venotonic, detoxifying, antioxidant effect.
• tocopheryl acetate 1%, - ester of alpha-tocopherol (vitamin E). Anti-aging effect (protection of collagen fibers from destruction, reduction of oxidative stress, prevents skin moisture loss), antioxidant effect (protection from UV, stopping chain reactions of cell destruction), preservative effect (higher than that of vitamin E, because acetate does not oxidize )
• gingko biloba 0.5% - venotonic, detoxifying, antioxidant effect.
• white mulberry 0.5% - whitening effect (suppresses tyrosinase activity and L-DOPA oxidation), anti-inflammatory effect, rejuvenating effect (stimulates collagen production), reparative effect.

Advantages of TimeCode peeling

In addition to its composition, simple protocols of procedures and excellent results when applied, one more advantage of this peeling can be noted.

It is very economical for a cosmetologist. You do not need to purchase peels of different strengths, which are usually sold in sets for several procedures. Only 4 products are enough, 2 of which are purchased by the patient for home care, and by combining these four drugs in different ways, 5 protocols with varying degrees of impact can be made!

Random review from cosmetic forums

“I couldn’t stand it, I worked on myself. Protocol "light recovery". There was no special feeling when applying. On the 3rd day, classic peeling began from the nasolabial triangle. I'm peeling off like a snake! I've never peeled like this before!

Let's see what will happen next. So far I like the result. There are plans to complete it completely, combining it with meso.”

Timecode peeling

This peel is a new line of products that exfoliates the skin without further neutralization, which is required by other peeling products. Time Code has in its line a large number of drugs that affect various skin problems. In addition, the drugs prepare the skin for other procedures.

BASIC enhances skin regeneration, promotes its renewal, and enhances the susceptibility of other procedures.

Time code contains several protocols. All drugs have a wide range of drugs.

Protocol No. 1

Time code products are divided into products for professional and home use.

Indications for use:

• photoaging;
• loss of vitality and former tone;
• maintaining youthful skin;
• preparatory stage before deep peeling.

Protocol No. 2

This stage is also aimed at eliminating photoaging, improving complexion, and increasing skin tone. The product is also excellent as a preventive measure. In addition, this protocol is a preparatory stage before the deep peeling procedure.

Unlike the first protocol, it operates more deeply. If the skin is sensitive, it reduces the possibility of erythema.

Protocol No. 3

Indications for use:

• photoaging;
• loss of vitality and former tone;
• maintaining youthful skin;
• preparatory stage before deep peeling.

Unlike stage number two, it acts more deeply. For sensitive skin, minimizes the chance of erythema. Protocol 3 is used for rough and porous skin; this protocol is also used by those who have already completed the first two protocols and want to enhance the effect obtained from their influence.

Protocol No. 4

Indications for use:

• scars on the skin;
• oily skin;
• acne, pigmentation;
• severe degree of aging.

The protocol is applied in the same way as all other protocols. And it requires the same home care.

Indications for use:

• scars on the skin;
• oily skin;
• acne, pigmentation;
• severe degree of aging.

The protocol differs from protocol 4 in that it is used for rougher and more porous skin. The protocol is applied in the same way as all other protocols. And it requires the same home care.

Reviews from cosmetologists about Timecode peeling

Timecode is not known to every beauty salon client, but in the cosmetology industry it has already taken a place in high-quality peeling. But before using a new product or performing an unfamiliar procedure, it would be a good idea to listen to the comments of specialists.

“The new product differs from its analogues in that it does not require subsequent neutralization of concentrate residues. On the contrary, active substances are characterized by deeper penetration into the epidermal layers, where at the middle level they activate regeneration and metabolic processes.”

“Retinoic peeling from the Spanish product Time Code is especially popular today. The main active component is retinol or vitamin A, which nourishes the dermis with beneficial microelements, removes waste, toxins and whitens (which is especially important for increased pigmentation). In salon conditions, there are 2 types of such peeling agent:

• one-day;
• two days.

The first is to apply a layer of the drug to a cleansed face, after two hours it is washed off, and then the next layer is applied. There can be from 2 to 4 such treatments depending on the type of dermis. The last layer is washed off by the client himself, at home. In the second case, a layer of gel is applied to the prepared face. And re-application is carried out independently the next day.

Note! Under the influence of peeling, the face will initially become red and swollen, but after a few hours these effects will pass. The main thing is not to pick off the flaky particles, use a nourishing or moisturizing cream.”

“Timecode peelings have proven themselves in many countries and their popularity is increasing. But in an effort to achieve beauty, it is important to consider that these cosmetics also have contraindications:

• pregnancy;
• violations of the integrity of the skin;
• skin diseases;
• allergic reactions."

“Each peeling from the Time Code line differs in its method of application. In the salon, the exfoliation procedure with Timecode Basic looks like this:

1. The area to be treated must be prepared by cleaning with milk and degreasing.
2. Using a cosmetic spatula, the product is distributed in an even layer and left on the face for 3 to 5 minutes.
3. Then the composition is washed off and the skin is treated with a cleanser.
4. At the final stage, the face is treated with a soothing cream from the same series, which will relax the skin and remove signs of stress.

Cosmetologists recommend applying this cream for another week after the procedure.

“Time Code Basic peeling is recommended for patients with noticeable signs of photoaging, as well as with weakened and sagging skin. For most cases, 2-3 procedures with an interval of 3 months are sufficient. If necessary, carry out another procedure after the same amount of time.”

“Timecode is a convenient product because it not only promotes cleansing, but helps maintain tone and elasticity, as well as solve the problems of oily skin and post-acne. It is used both as a tool for a separate procedure and as a care product for restoration after various cleanings and polishing.”

“Time Code Basic contains salicylic, phytic, mandelic acids, retinol, arbutin. In addition to the therapeutic effect of the components, it is worth noting:

• simple protocol of procedures;
• many indications for use;
• noticeable results after the first session;
• comfort and safety."

Retin-Age complex PEEL MEDICAL description:

The unique complex contains the two most delicate forms of vitamin A in terms of their effect on the skin: retinol and retinyl palmitate ester. Retinol, penetrating deep into the skin, triggers a cascade of reactions that promote the renewal of cellular composition, activation of metabolic processes, increased resistance to external influences, and active tissue regeneration. Ascorbic acid contributes to the greatest stability of retinol, and also participates in the antioxidant response, stimulates the work of fibroblasts, and strengthens the microvasculature. The inclusion of other active components in the complex avoids the development of skin reactivity to the action of active forms of vitamin A, such as swelling, redness, and itching.

How does the procedure work?

Yellow peeling is carried out in a cosmetology office by a cosmetologist. Only an experienced and qualified specialist will help prevent the occurrence of side effects and complications.

The duration of the procedure depends on the predicted aesthetic goals; after completion, the patient can go home.

Stages when teaching the TimeCodeBasic course for the first time:

1. The face is cleansed using a delicate Cleansear product, then the skin is degreased with tonic.
2. Apply a thin layer along the massage lines of TimeCodeBasic peeling using cotton swabs or a brush.
3. The composition lasts from 30 minutes to 4 hours, the duration of the session depends on the condition of the skin, individual characteristics, as well as exfoliation tasks. The patient may feel a tingling, slight burning sensation.
4. The face is cleansed with soft foam and warm water.
5. TimeCode Recovery regenerating nourishing cream is applied, which contains retinol, tocopherol, phytic acid, gingko biloba, and white mulberry.

To eliminate pronounced scars, with varying degrees of photoaging, as well as for patients with dense, porous skin, it is recommended to undergo a course of more intense exposure after the previous protocol.

Steps to reapply TimeCodeBasic:

1. The face is cleansed with Cleansear foam, and the skin is disinfected.
2. TimeCodeLight is applied in a thin layer using a brush or applicator.
3. Then TimeCodeBasic is applied to the skin, exposure time is from 30 minutes to 4 hours.
4. At the last stage, the peeling composition is washed off with water or using soft foam. To speed up recovery, TimeCode Recovery cream is used.

Impact force - 1

INDICATIONS: mild to moderate photoaging, uneven color, loss of tone, thin skin, prevention of aging of young skin, preparation for medium and deep peels and maintaining results after them.

MODE OF APPLICATION:

1. Clean with a mild CLEANSER cleanser and, if necessary, degrease the affected area.
2. Apply a thin, uniform layer of TIMECODE PEELAYER LIGHT to the skin of the treated area using an applicator (brush, cotton swabs) and leave for 3-5 minutes, depending on the indications, patient tolerance and clinical picture during the procedure.
3. Clean the affected area with water and a mild cleanser.
4. Apply TIMECODE RECOVERY CREAM (moisturizing and nourishing cream) to soothe and restore the skin. Continue applying the cream for 3-4 days, up to 5-6 times a day if necessary.

Home care

1. Continue applying TIMECODE RECOVERY CREAM (moisturizing and nourishing cream) for 3-4 days up to 5-6 times a day.
2. To enhance and maintain the results obtained after a professional procedure, use TIMECODE RST CREAM once a day in the evening for 1.5-2 months.
3. During the course of procedures, as well as 4 weeks after its completion, it is recommended to regularly apply MELABLOCK HSP SPF 50+ sunscreen and limit exposure to the sun.

COURSE OF PROCEDURES:

The course of use of TIME CODE PEELAYER LIGHT is 5 procedures with an interval of 1-2 weeks between them. During the course of procedures, as well as 4 weeks after its completion, it is recommended to regularly apply MELABLOCK HSP SPF 50+ sunscreen and limit exposure to the sun.

Impact force - 2

INDICATIONS: mild to moderate photoaging, uneven color, loss of tone, thin skin, prevention of aging of young skin, preparation for medium and deep peels and maintaining results after them.

DIFFERENCE FROM THE PROTOCOL Impact strength - 1 - allows you to increase the depth of the procedure without increasing skin reactivity - reduces the possibility of erythema in sensitive skin

MODE OF APPLICATION:

1. Clean with a mild CLEANSER cleanser and, if necessary, degrease the affected area.
2. Apply a thin, uniform layer of TIMECODE PEELAYER LIGHT to the skin of the treated area using an applicator (brush, cotton swabs) and leave for 3-5 minutes, depending on the indications, patient tolerance and clinical picture during the procedure.
3. Without rinsing off TIMECODE PEELAYER LIGHT, apply a thin layer with gloved hands or using an applicator (brush, cotton swabs) TIMECODE RECOVERY CREAM (moisturizing and nourishing cream) under the film for 10-15 minutes. After the end of the exposure, remove the film and distribute the remaining cream with soft massage movements over the treatment area. Remove the remaining cream with paper napkins, lightly applying them to the skin.

Home care

1. After 8-12 hours, clean the affected area with water and a mild cleanser, apply a thin layer of TIMECODE RECOVERY CREAM.
2. To soothe and restore the skin, continue to apply TIMECODE RECOVERY CREAM for 3-4 days, up to 5-6 times a day if necessary.
3. To enhance and maintain the results obtained after a professional procedure, use TIMECODE RST CREAM in the evening for 1.5-2 months (2-5 times a week depending on the skin reaction).
4. During the course of procedures, as well as 4 weeks after its completion, it is recommended to regularly apply MELABLOCK HSP SPF 50+ sunscreen and limit exposure to the sun.

COURSE OF PROCEDURES:

The course of use of TIMECODE PEELAYER LIGHT is 5 procedures with an interval of 1-2 weeks between them. During the course of procedures, as well as 4 weeks after its completion, it is recommended to regularly apply MELABLOCK HSP SPF 50+ sunscreen and limit exposure to the sun.

Impact strength - 3

INDICATIONS: mild to moderate photoaging, uneven color, loss of tone, thin skin, prevention of aging of young skin, preparation for medium and deep peels and maintaining results after them.

DIFFERENCE FROM PROTOCOLS Strength of influence - 1 and 2:

Allows you to increase the depth of the effect of the procedure without increasing the reactivity of the skin - recommended for patients with porous, rough skin, but for whom the use of TIMECODE PEELAYER BASIC is not indicated - recommended for patients who have already completed protocols 1 and 2 and who need to enhance the effect of the effect.

MODE OF APPLICATION:

1. Clean with a mild CLEANSER cleanser and, if necessary, degrease the affected area.
2. Apply a thin, uniform layer of TIMECODE PEELAYER LIGHT to the skin of the treated area using an applicator (cotton swabs) and leave for 3-5 minutes, depending on the indications, patient tolerance and clinical picture during the procedure.
3. Without rinsing off TIMECODE PEELAYER LIGHT, apply a thin layer with gloved hands or using an applicator (brush, cotton swabs) TIMECODE RST CREAM (rejuvenating and depigmenting cream) under the film for 10-15 minutes. After the end of the exposure, remove the film and distribute the remaining cream with soft massage movements over the treatment area. Remove the remaining cream with paper napkins, lightly applying them to the skin.

Home care

1. After 8-12 hours, clean the affected area with water and a mild cleanser CLEANSER, apply a thin layer of TIMECODE RECOVERY CREAM.
2. To soothe and restore the skin, continue to apply TIMECODE RECOVERY CREAM for 3-4 days, up to 5-6 times a day if necessary.
3. To enhance and maintain the results obtained after a professional procedure, use TIMECODE RST CREAM (anti-aging and depigmenting cream) in the evening for 1.5-2 months (2-5 times a week depending on the skin reaction).
4. During the course of procedures, as well as 4 weeks after its completion, it is recommended to regularly apply MELABLOCK HSP SPF 50+ sunscreen and limit exposure to the sun.

COURSE OF PROCEDURES:

The course of use of TIMECODE PEELAYER LIGHT is 5 procedures with an interval of 1-2 weeks between them. During the course of procedures, as well as 4 weeks after its completion, it is recommended to regularly apply MELABLOCK HSP SPF 50+ sunscreen and limit exposure to the sun.

Impact strength - 4

INDICATIONS: moderate to severe photoaging, hyperpigmentation, post-inflammatory hyperpigmentation, lentigines, scars, acne, actinic keratosis, oily skin and enlarged pores.

MODE OF APPLICATION:

1. Clean with a mild cleanser CLEANSER and degrease the affected area.
2. Apply a thin, uniform layer of TIMECODE PEELAYER BASIC using an applicator (brush, cotton swabs) onto the skin of the treated area and leave for 30 minutes - 4 hours, depending on the indications, patient tolerance and clinical picture during the procedure.
3. Clean the affected area with water and a mild cleanser.
4. Apply TIMECODE RECOVERY CREAM (moisturizing and nourishing cream) to soothe and restore the skin.

Home care

1. Continue applying TIMECODE RECOVERY CREAM (moisturizing and nourishing cream) for 3-4 days, up to 5-6 times a day if necessary.
2. After complete skin restoration, to enhance and maintain the results obtained after a professional procedure, use TIMECODE RST CREAM in the evening for 1.5-2 months (2-5 times a week depending on the skin reaction).
3. During the course of procedures, as well as 2-3 months after its completion, it is recommended to regularly apply MELABLOCK HSP SPF 50+ sunscreen and limit exposure to the sun.

COURSE OF PROCEDURES:

The course of use of TIMECODE PEELAYER BASIC is 2 procedures with an interval of 3 months between them. If necessary, a 3rd procedure can be performed at the same interval. During the course of procedures, as well as 2-3 months after its completion, it is recommended to regularly apply MELABLOCK HSP SPF 50+ sunscreen and limit exposure to the sun.

Impact strength - 5

INDICATIONS: moderate to severe photoaging, hyperpigmentation, post-inflammatory hyperpigmentation, lentigines, scars, acne, actinic keratosis, oily skin and enlarged pores.

DIFFERENCE FROM THE PROTOCOL Strength of influence - 4:

allows you to enhance the depth and degree of impact of the procedure - recommended for patients with porous, rough skin

Recommended for patients who have already completed Strength of Impact protocols 3 and 4 and who need to enhance the effect.

MODE OF APPLICATION:

1. Clean with a mild cleanser CLEANSER and degrease the affected area.
2. Apply a thin, uniform layer of TIMECODE PEELAYER LIGHT to the skin of the treated area using an applicator (brush, cotton swabs) and leave for 3-5 minutes, depending on the indications, patient tolerance and clinical picture during the procedure.
3. Without rinsing off TIMECODE PEELAYER LIGHT, apply a thin layer using the applicator (brush, cotton swabs) TIMECODE PEELAYER BASIC and leave for 30 minutes - 4 hours, depending on the indications, patient tolerance and clinical picture during the procedure.
4. Clean the affected area with water and a mild cleanser and apply a thin layer of TIMECODE RECOVERY CREAM. To soothe and restore the skin, continue to apply this cream for 3-4 days, up to 5-6 times a day if necessary.

Home care

1. To soothe and restore the skin, continue to apply TIMECODE RECOVERY CREAM for 3-4 days, up to 5-6 times a day if necessary.
2. After complete skin restoration, to enhance and maintain the results obtained after a professional procedure, use TIMECODE RST CREAM in the evening for 1.5-2 months (2-5 times a week depending on the skin reaction).
3. During the course of procedures, as well as 2-3 months after its completion, it is recommended to regularly apply MELABLOCK HSP SPF 50+ sunscreen and limit exposure to the sun.

COURSE OF PROCEDURES:

The course of use of TIMECODE PEELAYER BASIC is 2 procedures with an interval of 3 months between them. If necessary, a 3rd procedure can be performed at the same interval.

During the course of procedures, as well as 2-3 months after its completion, it is recommended to regularly apply MELABLOCK HSP SPF 50+ sunscreen and limit exposure to the sun.

How to use peeling pads?

The popularity of cleansing pads is due not only to their effective impact

The ease of use is of no small importance. Cleaning wipes can be taken with you on the go; the pads will not take up much space in a woman’s purse

But this is not the main thing. Using the Peeling Pad is a huge time saver, which is never enough!

If you purchased peeling pads with acids, they are usually placed in a hermetically sealed jar in quantities of up to 70 pieces. More often, combined, double-sided pads are produced (I come across exactly these). The rough side of the disc is for exfoliating, rolling and polishing. Smooth – for smoothing and renewal. Usually on the smooth side there is a special pocket built into which the middle and index fingers are placed for ease of use.

Now about the procedure itself. There is a slight difference in application, so I advise you to always read the instructions. For example, there are pads that require you to wash your face after using them. There are those that are applied to dry skin or vice versa, only to damp skin.

I use peeling pads in the following order:

I thoroughly wash my face with foam cleanser.

Using a cleansing pad

I apply the serum

When using the disc, you do not need to rub your skin too much. We do everything with light, soft, circular movements without any effort. First we go over the face with the rough side of the disc, then the smooth one. We do not touch the area around the eyes and mouth. We spend more time caring for the “T” zone, that is, the forehead and nose. Then I wait 20-30 minutes and wash my face with warm water, my face feels more comfortable this way, and apply the serum.

Operating principle and effectiveness

The Timecode product was developed by specialists from the Spanish laboratory Expertise International, who distinguish peeling by its diverse effects, minimal risk of injury, and short recovery period for the skin. Based on the brand name (“time code”), the emphasis is on preserving youth and preventing aging.

The action of exfoliants is aimed at deep cleansing of the skin, eliminating dead cells, maintaining skin tone and elasticity. Basic exfoliants contain lactic, mandelic, and ferulic acids, which ensure softness and delicacy of cleansing the dermis.

Basic peeling compositions in the Timecode Player line are medium-impact peels that remove dead skin cells in the epidermal layers, the effectiveness of which is confirmed by reviews from cosmetologists and dermatologists. It is the acids that promote loyal, and most importantly, safe cell coagulation.

These lines are relevant in eliminating the following problems:

• pigmentation;
• acne;
• greasy gloss;
• enlarged pores;
• black dots;
• lentigo.

In addition to solving these problems, Timecode products help prepare the face for many cosmetic procedures.